Your Devoted Ulster County, NY Home Remodeling & Basement Finishing Professionals

This homeowner reached out to us during the torrential rain storms at the end of the summer season.  Our Transformation Specialist Bryon carefully explained our Full Perimeter Waterguard with Cleanspace System.  This will ensure that no moisture enters the space, and will allow this homeowner to turn this previously unusable space to the the art studio she has always envisioned.

Stay Tuned for Total Basement Finishing updates!!!

A home owner in Kingston, New York reached out to us with concerns about their crawlspace. It was damp, moldy, and unusable, creating a major issue under their home. The homeowner called and discuss their concerns with our appointment center, who then scheduled an inspection with one of our highly trained specialists. On the day of the inspection, our specialist arrived, met with the homeowner and performed a thorough inspection of the crawlspace. The inspection revealed severe moisture issues and deteriorating insulation. To address these problems, our specialist proposed a complete encapsulation and insulation solution using SilverGlo and CleanSpace vapor barrier system. The first step was to remove the old damaged insulation and prepare the crawlspace for encapsulation. We then installed SilverGlo insulation on the crawlspace walls to improve energy efficiency, and to help reflect heat back into the space. Following this, we install the CleanSpace vapor barrier system over the floor and walls to prevent any moisture intrusion. This system creates a clean, dry, and bright environment in the crawlspace, turning it into a usable and healthy space. After reviewing the proposed solution with the homeowner, they gave us the greenlight to proceed. On the day of the installation, our production team led by a highly trained Foreman came in and installed the plan. The transformation, a once damp and moldy crawlspace was now clean, dry, and well insulated, owner was thrilled with the results and no longer had concerns about their crawlspace. 

Homeowner in Highland, New York, reached out to us with concerns about their crawlspace. It would filled with moisture, mold, and water every time it rained. The homeowner called us and discuss their concerns with our appointment center, who then scheduled an inspection with one of our highly trained specialist. On the day of the inspection our specialist arrived, met with the homeowner, and performed a thorough inspection of the crawlspace. The inspection revealed significant moisture issues and in adequate water drain. To address these problems, our specialist proposed a complete encapsulation solution using our CleanSpace and TripleSafe sump pump system. the first step was to remove any debris and prepare the crawlspace encapsulation. We then installed our CleanSpace vapor barrier system over the floor and walls to prevent future moisture intrusion. This system creates a clean, dry and brighten environment in the crawlspace, turning it into a usable and healthy space. To ensure that any water entering the crawlspace would be affectively managed, we installed our TripleSafe sump pump system. This system features three levels of protection: a primary pump, a secondary pump for heavy water flow, and a battery back up pump for power outages, ensuring the crawlspace remains dry under all conditions. After reviewing the proposed solution with the homeowner, they gave us the greenlight to proceed. On the day of the installation, our production team led by a highly trained Foreman, installed the planned solution our specialist created. The transformation was remarkable. The once damp and moldy crawlspace, was now clean, dry, and well protected against water intrusion. The homeowner was thrilled with the results, and no longer had concerns about their crawlspace.

A homeowner in New Paltz, New York, reached out to us with concerns about water intrusion through their foundation walls, causing persistent dampness and the risk of mold growth in their basement. The homeowner called us and discussed their concerns with our appointment center, who then scheduled an inspection with one of our highly trained specialists. On the day of the inspection, our specialist arrived, met with the homeowner, and performed a thorough inspection of the basement. The inspection revealed that water was seeping through cracks in the foundation walls due to hydrostatic pressure. To address these problems, our specialist proposed a comprehensive waterproofing solution to ensure the basement remain dry and protected. The solution included installing our WaterGuard drainage system, a TripleSafe sump pump system, and our CleanSpace wall system. The first step involves installing the WaterGuard drainage system around the perimeter of the basement floor. This system captures water seepage before it reaches the basement floor and directs it to our sump pump system. Next, we install our TripleSafe sump pump system, which features three levels of protection, a primary pump, a secondary pump for heavy water flow, and a battery backup pump for power outages. This insurance continuously operation, even during power failures, keeping the basement dry at all times. Finally, we installed our CleanSpace wall system to provide a clean, bright finish to the walls, while acting as a vapor barrier, directing any wall seepage into our WaterGuard system. After reviewing the proposed solution with the homeowner, they gave us the greenlight to proceed. On the day of the installation, our production team, led by a highly trained Foreman, installed the plan our specialist created. The transformation was remarkable. The once damp basement was now dry, bright, and protected against water intrusion. The homeowner was thrilled with the results, and no longer had concerns about water entering their basement. 

A homeowner in Highland, New York, reached out to us with concerns about their crawlspace, which was damp, moldy, and unusable, creating a major issue under their home. The homeowner called us and discussed their concerns with our Appointment Center, who then scheduled an inspection with one of our highly trained specialists. On the day of the inspection, our specialist arrived, met with the homeowner, and performed a thorough inspection of the crawlspace. The inspection revealed severe moisture issues and deteriorating insulation. To address these problems, our specialist proposed a complete encapsulation solution using CleanSpace and a TripleSafe sump pump system. The first step was to remove any debris and prepare the crawlspace for encapsulation. Than, we installed a layer of drainage matting to separate the crawl space from the dirt floor, while allowing water to move freely underneath. We then installed the CleanSpace vapor, barrier system over the matting and walls to prevent future moisture intrusion. This system creates a clean, dry, and bright environment in the crawlspace, turning it into a usable and healthy space. To ensure that any water entering the crawlspace would be effectively managed, we installed our TripleSafe sump pump system. This system features three levels of protection, a primary pump, a secondary pump for heavy water flow, and a battery backup pump for power outages, ensuring the crawlspace remains dry under all conditions. After reviewing the proposed solution with the homeowner, they gave us the go ahead to install the proposed plan. On the day of the installation, our production team, led by a highly trained Foreman, installed the proposed plan our specialist created. The transformation was remarkable. A once damp and moldy crawlspace, was now clean, dry, and well protected against water intrusion. The homeowner was thrilled with the results, and no longer had concerns about their crawlspace. 

A homeowner in Highland, New York, reached out to us with concerns about their basement, which was experiencing water intrusion, every time it rained, causing persistent, dampness and the risk of mold growth. The homeowner called us and discussed their concerns with our appointment center, who then scheduled an inspection with one of our highly trained special. On the day of the inspection, our specialist arrived, met with the homeowner, and performed a thorough inspection of the basement. Our specialists found that water was seeping through the floor and wall joint in the foundation due to hydrostatic pressure. To address these problems, our specialist proposed our waterproofing system to ensure the basement remain dry and usable. The solution included, installing our WaterGuard system, a TripleSafe sump pump system, and a SaniDry dehumidifier. The first step involved installing the WaterGuard system around the perimeter of the basement floor. This system captures water seepage before it can enter the basement and directs it to our sump pump system. Next, we installed our TripleSafe sump pump system, which comes with three levels of protection, a primary pump, a secondary pump for heavy water flow, and a battery backup pump for power outages, to ensure operation, even during power failures, keeping the basement dry and usable no matter what Mother Nature throws its way. Finally, we installed our SaniDry dehumidifier to maintain the humidity levels and prevent mold and mildew growth. After reviewing the plan with the homeowner, they couldn't wait for us to install our system so they could have a dry, usable basement again. On the day of the installation, our production team, led by a highly trained Foreman, installed the proposed plan. The end result was a once wet basement was now dry, and usable. The homeowner now has a basement that will remain completely dry and usable for many years to come. 

A homeowner in Willow, New York noticed their basement walls were bowing inward, concerned about the structural integrity of their home. Worried about potential collapse, and further damage, they reached out to us for a solution. Our appointment center scheduled an inspection, and we sent one of our experience specialist to assess the situation. Upon inspection, our specialist confirmed that the foundation walls were bowing inward due to the external soil pressure, which had compromised the stability of the structure. To address the issue our specialist recommended they have our CarbonArmor wall system installed to provide stability and strength to the once failing wall. The CarbonArmor system is made up of strong carbon fibers that are bond to the foundation walls with epoxy. This system is designed to counteract the external pressure, which is causing the walls to bow inward, the system will prevent the walls from moving or collapsing. This system is installed by our crew coming in and reviewing the plans our specialists created to properly repair this failing wall. First our crew prepped the wall for our CarbonArmor system by scraffingizing the walls and making them nice and smooth to ensure proper adhesion. Next they applied a layer of epoxy over the area they just scraffized and then applied the CarbonArmor strapped to the wall. Once the epoxy dries this wall is immediately stabile and no longer at risk of failure. After the installation our production crew reviewed the finished job with the homeowner and they were happy to know that their foundation wall's were secure and stabile again.