Highland, NY's Leading Home Repair Contractor

A homeowner in Highland, New York, reached out to us with concerns about their basement, which was experiencing water intrusion, every time it rained, causing persistent, dampness and the risk of mold growth. The homeowner called us and discussed their concerns with our appointment center, who then scheduled an inspection with one of our highly trained special. On the day of the inspection, our specialist arrived, met with the homeowner, and performed a thorough inspection of the basement. Our specialists found that water was seeping through the floor and wall joint in the foundation due to hydrostatic pressure. To address these problems, our specialist proposed our waterproofing system to ensure the basement remain dry and usable. The solution included, installing our WaterGuard system, a TripleSafe sump pump system, and a SaniDry dehumidifier. The first step involved installing the WaterGuard system around the perimeter of the basement floor. This system captures water seepage before it can enter the basement and directs it to our sump pump system. Next, we installed our TripleSafe sump pump system, which comes with three levels of protection, a primary pump, a secondary pump for heavy water flow, and a battery backup pump for power outages, to ensure operation, even during power failures, keeping the basement dry and usable no matter what Mother Nature throws its way. Finally, we installed our SaniDry dehumidifier to maintain the humidity levels and prevent mold and mildew growth. After reviewing the plan with the homeowner, they couldn't wait for us to install our system so they could have a dry, usable basement again. On the day of the installation, our production team, led by a highly trained Foreman, installed the proposed plan. The end result was a once wet basement was now dry, and usable. The homeowner now has a basement that will remain completely dry and usable for many years to come. 

A homeowner in Highland, New York, reached out to us with concerns about their crawlspace, which was damp, moldy, and unusable, creating a major issue under their home. The homeowner called us and discussed their concerns with our Appointment Center, who then scheduled an inspection with one of our highly trained specialists. On the day of the inspection, our specialist arrived, met with the homeowner, and performed a thorough inspection of the crawlspace. The inspection revealed severe moisture issues and deteriorating insulation. To address these problems, our specialist proposed a complete encapsulation solution using CleanSpace and a TripleSafe sump pump system. The first step was to remove any debris and prepare the crawlspace for encapsulation. Than, we installed a layer of drainage matting to separate the crawl space from the dirt floor, while allowing water to move freely underneath. We then installed the CleanSpace vapor, barrier system over the matting and walls to prevent future moisture intrusion. This system creates a clean, dry, and bright environment in the crawlspace, turning it into a usable and healthy space. To ensure that any water entering the crawlspace would be effectively managed, we installed our TripleSafe sump pump system. This system features three levels of protection, a primary pump, a secondary pump for heavy water flow, and a battery backup pump for power outages, ensuring the crawlspace remains dry under all conditions. After reviewing the proposed solution with the homeowner, they gave us the go ahead to install the proposed plan. On the day of the installation, our production team, led by a highly trained Foreman, installed the proposed plan our specialist created. The transformation was remarkable. A once damp and moldy crawlspace, was now clean, dry, and well protected against water intrusion. The homeowner was thrilled with the results, and no longer had concerns about their crawlspace. 

Homeowner in Highland, New York, reached out to us with concerns about their crawlspace. It would filled with moisture, mold, and water every time it rained. The homeowner called us and discuss their concerns with our appointment center, who then scheduled an inspection with one of our highly trained specialist. On the day of the inspection our specialist arrived, met with the homeowner, and performed a thorough inspection of the crawlspace. The inspection revealed significant moisture issues and in adequate water drain. To address these problems, our specialist proposed a complete encapsulation solution using our CleanSpace and TripleSafe sump pump system. the first step was to remove any debris and prepare the crawlspace encapsulation. We then installed our CleanSpace vapor barrier system over the floor and walls to prevent future moisture intrusion. This system creates a clean, dry and brighten environment in the crawlspace, turning it into a usable and healthy space. To ensure that any water entering the crawlspace would be affectively managed, we installed our TripleSafe sump pump system. This system features three levels of protection: a primary pump, a secondary pump for heavy water flow, and a battery back up pump for power outages, ensuring the crawlspace remains dry under all conditions. After reviewing the proposed solution with the homeowner, they gave us the greenlight to proceed. On the day of the installation, our production team led by a highly trained Foreman, installed the planned solution our specialist created. The transformation was remarkable. The once damp and moldy crawlspace, was now clean, dry, and well protected against water intrusion. The homeowner was thrilled with the results, and no longer had concerns about their crawlspace.